跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show memory

Display current memory usage on the M I/O Aggregator.

Syntax

show memory [stack-unit 0–5]

Parameters

stack-unit 0–5

(OPTIONAL) Enter the keywords stack-unit then the stack unit ID of the stack member to display memory information on the designated stack member.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

The output for show memory command displays the memory usage of LP part (sysdlp) of the system. The sysdlp is an aggregate task that handles all the tasks running on the CPU.

Example

Dell#show memory
                                             Statistics On Unit 0 Processor
                                             ===========================
                                             Total(b)   Used(b)  Free(b)   Lowest(b)   Largest(b)
                                             268435456  4010354  264425102  264375410   264425102