Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

The Dell Networking OS supports a maximum of 100 files, at the root directory level, on both the internal and external Flash.

The usbflash commands are supported. For a list of approved USB vendors, refer to the Dell Networking OS Release Notes.

When copying a file to a remote location (for example, using Secure Copy [SCP]), enter only the keywords and Dell Networking OS prompts you for the rest of the information.

For example, when using SCP, you can enter the copy running-config scp: command. The running-config is the source and the target is specified in the ensuing prompts. Dell Networking OS prompts you to enter any required information, as needed for the named destination — remote destination, destination filename, user ID and password, and so forth.

When you use the copy running-config startup-config command to copy the running configuration (the startup configuration file amended by any configuration changes made because the system was started) to the startup configuration file, Dell Networking OS creates a backup file on the internal flash of the startup configuration.

In the copy scp: flash: example, specifying SCP in the first position indicates that the target to specify in the ensuing prompts. Entering flash: in the second position means that the target is the internal Flash. In this example, the source is on a secure server running SSH, so you are prompted for the UDP port of the SSH server on the remote host.

Dell#copy running-config scp:
                                             Address or name of remote host []: 10.10.10.1
                                             Port number of the server [22]: 99
                                             Destination file name [startup-config]: old_running
                                             User name to login remote host: sburgess
                                             Password to login remote host:
                                             
                                             Password to login remote host? dilling
                                          

Dell#copy scp: flash:
                                             Address or name of remote host []: 10.11.199.134
                                             Port number of the server [22]: 99
                                             Source file name []: test.cfg
                                             User name to login remote host: admin
                                             Password to login remote host:
                                             Destination file name [test.cfg]: test1.cfg