跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip igmp groups

View the IGMP groups.

Syntax

show ip igmp groups [group-address [detail] | detail | interface [group-address [detail]]]

Parameters

group-address	(OPTIONAL) Enter the group address in dotted decimal format to view information on that group only.
interface	(OPTIONAL) Enter the interface type and slot/port information: For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094.
detail	(OPTIONAL) Enter the keyword detail to display the IGMPv3 source information.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#show ip igmp groups
                                             Total Number of Groups: 5
                                             IGMP Connected Group Membership
                                             Group Address Interface Mode Uptime
                                             Expires Last Reporter
                                             225.0.0.0 Vlan 100 IGMPv2 00:00:05
                                             00:02:04 3.0.0.51
                                             Member Ports: Po 2
                                             225.0.0.2 Vlan 100 IGMPv2 00:00:05
                                             00:02:04 3.0.0.51
                                             Member Ports: Po 2
                                             225.0.0.3 Vlan 100 IGMPv2 00:00:05
                                             00:02:04 3.0.0.51
                                             Member Ports: Po 2
                                             225.0.0.4 Vlan 100 IGMPv2 00:00:05
                                             00:02:04 3.0.0.51
                                             Member Ports: Po 2

Field	Description
Group Address	Lists the multicast address for the IGMP group.
Interface	Lists the interface type, slot and port number.
Mode	Displays the IGMP version used.
Uptime	Displays the amount of time the group has been operational.
Expires	Displays the amount of time until the entry expires.
Last Reporter	Displays the IP address of the last host to be a member of the IGMP group.
Member Ports	Indicates the member ports of the port channel. If the port channel is VLT, an asterisk (*) after the port channel number indicates the port channel is locally down and that a remote VLT port is up.