跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show qos dscp-color-map

Display the DSCP color map for one or all interfaces.

Syntax

show qos dscp-color-map map-name

Parameters

map-name

Enter the name of the color map.

Defaults

None

Command Modes

EXEC

Supported Modes

Full–Switch

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.7(0.0)	Introduced on the S6000-ON.
9.5.0.0	Introduced on the Z9000, S6000, S4820T, S4810, and MXL.

Example

Display all DSCP color maps.
                                             
                                             Dell# show qos dscp-color-map
                                             Dscp-color-map mapONE
                                             yellow 4,7
                                             red 20,30
                                             Dscp-color-map mapTWO
                                             yellow 16,55
                                             
                                             Display a specific DSCP color map.
                                             
                                             Dell# show qos dscp-color-map mapTWO
                                             Dscp-color-map mapTWO
                                             yellow 16,55

Related Commands

show qos dscp-color-policy — displays a DSCP Color Policy Configuration