跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

bgp client-to-client reflection

Allows you to enable route reflection between clients in a cluster.

Syntax

bgp client-to-client reflection

To disable client-to-client reflection, use the no bgp client-to-client reflection command.

Defaults

Enabled when a route reflector is configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Route reflection to clients is not necessary if all client routers are fully meshed.

Related Commands

bgp cluster-id — assigns an ID to a BGP cluster with two or more route reflectors.

neighbor route-reflector-client — configures a route reflector and clients.