跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp filter-list

View the routes that match the filter lists.

Syntax

show ip bgp [ ipv4 unicast] filter-list as-path-name

Parameters

ipv4 unicast	(OPTIONAL) Enter the keywords `ipv4 unicast` to view information only related to ipv4 unicast routes.
as-path-name	Enter an AS-PATH access list name. The range is 140 characters.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip bgp filter-list hello command shown in the following example.

Field	Description
Path source codes	Lists the path sources shown to the right of the last AS number in the Path column: i = internal route entry a = aggregate route entry c = external confederation route entry n = network route entry r = redistributed route entry
Next Hop	Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric	Displays the BGP route’s metric, if assigned.
LocPrf	Displays the BGP LOCAL_PREF attribute for the route.
Weight	Displays the route’s weight.
Path	Lists all the ASs the route passed through to reach the destination network.

Example

Dell#show ip bgp filter-list hello
                                             BGP table version is 80227, local router ID is 120.1.1.1
                                             Status codes: s suppressed, d damped, h history, * valid, > best
                                             Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n -
                                             network
                                             Origin codes: i - IGP, e - EGP, ? - incomplete
                                             
                                             Network    Next Hop                Metric LocPrf Weight Path
                                             * I 6.1.5.0/24 192.100.11.2             20000   9999    0 ?
                                             * I            192.100.8.2              20000   9999    0 ?
                                             * I            192.100.9.2              20000   9999    0 ?
                                             * I            192.100.10.2             20000   9999    0 ?
                                             *>I            6.1.5.1                  20000   9999    0 ?
                                             * I            6.1.6.1                  20000   9999    0 ?
                                             * I            6.1.20.1                 20000   9999    0 ?
                                             * I            6.1.6.0/24 192.100.11.2  20000   9999    0 ?
                                             * I            192.100.8.2              20000   9999    0 ?
                                             * I            192.100.9.2              20000   9999    0 ?
                                             * I            192.100.10.2             20000   9999    0 ?
                                             *>I            6.1.5.1                  20000   9999    0 ?
                                             * I            6.1.6.1                  20000   9999    0 ?
                                             * I            6.1.20.1                 20000   9999    0 ?
                                             * I            6.1.20.0/24 192.100.11.2 20000   9999    0 ?
                                             * I            192.100.8.2              20000   9999    0 ?
                                             * I            192.100.9.2              20000   9999    0 ?
                                             * I            192.100.10.2             20000   9999    0 ?
                                             Dell#