跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show vlan

Displays the current VLAN configurations on the switch.

Syntax

show vlan [brief |id vlan-id | name vlan-name]

Parameters

brief	(OPTIONAL) Enter the keyword `brief` to display the following information: VLAN ID VLAN name (left blank if none is configured.) Spanning Tree Group ID MAC address aging time IP address
id vlan-id	(OPTIONAL) Enter the keyword `id` followed by a number from 1 to 4094. Only information on the VLAN specified is displayed
name vlan-name	(OPTIONAL) Enter the keyword name followed by the name configured for the VLAN. Only information on the VLAN named is displayed.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

The following describes the show vlan command information given in the following example

Column Heading	Description
(Column 1 — no heading)	asterisk symbol (*) = Default VLAN G = GVRP VLAN P = primary VLAN C = community VLAN I = isolated VLAN
NUM	Displays existing VLAN IDs.
Status	Displays the word Inactive for inactive VLANs and the word Active for active VLANs.
Q	Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T for tagged interface, U (for untagged interface), x (uncapitalized x) for Dot1x untagged, or X (capitalized X) for Dot1x tagged.
Ports

Example

Dell# show vlan id 40
                                             Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
                                             VLANs, P - Primary, C - Community, I - Isolated
                                             Q: U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Vlan-stack, H - VSN tagged
                                             i - Internal untagged, I - Internal tagged, v - VLT untagged, V
                                             - VLT tagged
                                             NUM Status Description Q Ports
                                             1 Inactive a
                                             Dell#

Example (Brief)

Dell#show vlan brief
                                             VLAN Name                              STG MAC Aging   IP Address
                                             ---- -------------------------------- ---- --------- ------------------
                                             1                                       0      0        unassigned
                                             2                                       0      0        unassigned
                                             20                                      0      0        unassigned
                                             1002                                    0      0        unassigned
                                             Dell#

Example (Using a VLAN Name)

Dellconf)#interface vlan 222
                                             Dell(conf-if-vl-222)#name test
                                             Dell(conf-if-vl-222)#do show vlan name test
                                             Codes: * - Default VLAN, G - GVRP VLANs
                                             Q: U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Vlan-stack
                                             NUM Status Description Q Ports
                                             222 Inactive U TenGig 1/22
                                             Dell(conf-if-vl-222)#
                                             Dell#

Related Commands

interface vlan — Configures a VLAN.