跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

track

Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled.

Syntax track interface [priority-cost cost]

To disable monitoring, use the no track interface command.

Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
  • For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.
  • For Port Channel interface types, enter the keywords port-channel then the number. The range is from 1 to 128.
  • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information.
  • For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range is from 1 to 4094.
cost (OPTIONAL) Enter a number as the amount to be subtracted from the priority value. The range is 1 to 254. The default is 10.
Defaults cost = 10
Command Modes VRRP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information If the interface is disabled, the cost value is subtracted from the priority value and forces a new MASTER election if the priority value is lower than the priority value in the BACKUP virtual routers.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\