跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

forward-delay

The amount of time the interface waits in the Blocking State and the Learning State before transitioning to the Forwarding State.

Syntax

forward-delay seconds

To return to the default setting, use the no forward-delay command.

Parameters

seconds

Enter the number of seconds the interface waits in the Blocking State and the Learning State before transiting to the Forwarding State. The range is from 4 to 30. The default is 15 seconds .

Defaults

15 seconds

Command Modes

MULTIPLE SPANNING TREE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

max-age — changes the wait time before MSTP refreshes protocol configuration information.

hello-time — changes the time interval between bridge protocol data units (BPDUs).