跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show interfaces private-vlan

Display type and status of PVLAN interfaces.

Syntax

show interfaces private-vlan [interface interface]

Parameters

interface interface

(OPTIONAL) Enter the keyword interface then the ID of the specific interface for which to display PVLAN status.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

This command has two types of display — a list of all PVLAN interfaces or for a specific interface. Examples of both types of output are shown below.

The following describes the show interfaces private-vlan command shown in the following examples.

Field	Description
Interface	Displays the type of interface and associated slot and port number.
Vlan	Displays the VLAN ID of the designated interface.
PVLAN-Type	Displays the type of VLAN in which the designated interface resides.
Interface Type	Displays the PVLAN port type of the designated interface.
Status	States whether the interface is operationally up or down.

Example (All)

Dell# show interfaces private-vlan
                                             Interface Vlan PVLAN-Type Interface Type Status
                                             --------- ---- ---------- -------------- --------
                                             Gi 2/1    10   Primary    Promiscuous    Up
                                             Gi 2/2    100  Isolated   Host           Down
                                             Gi 2/3    10   Primary    Trunk          Up
                                             Gi 2/4    101  Community  Host           Up

Example (Specific)

Dell# show interfaces private-vlan Gi 2/2
                                             Interface Vlan PVLAN-Type Interface Type Status
                                             --------- ---- ---------- -------------- --------
                                             Gi 2/2    100  Isolated   Host           Up

Related Commands

private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.

show vlan private-vlan — displays the PVLANs and/or interfaces that are part of a PVLAN.

show vlan private-vlan mapping — displays the primary-secondary VLAN mapping.

switchport mode private-vlan — sets PVLAN mode of the selected port.