跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

max-age

To maintain configuration information before refreshing that information, set the time interval for the MSTB.

Syntax

max-age seconds

To return to the default values, use the no max-age command.

Parameters

max-age

Enter a number of seconds the system waits before refreshing configuration information. The range is from 6 to 40. The default is 20 seconds.

Defaults

20 seconds

Command Modes

MULTIPLE SPANNING TREE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

edge-port bpdufilter default — the amount of time the interface waits in the Blocking State and the Learning State before transitioning to the Forwarding State.

hello-time — changes the time interval between BPDUs.