跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show boot selection

Displays the ROM bootstrap bootflash partition.

Syntax

show boot selection

Command Modes

uBoot

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

BOOT_USER # show boot blc ?
                                             Total 1 possible command found.
                                             Possible command list:
                                             show boot blc
                                             show the boot loop counter value
                                             BOOT_USER # show boot blc
                                             Boot Loop Counter : 10
                                             
                                             BOOT_USER #