跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

default-information originate

To generate a default external route into an OSPF routing domain, configure the system.

Syntax

default-information originate [always] [metric metric-value] [metric-type type-value] [route-map map-name]

To return to the default values, use the no default-information originate command.

Parameters

always	(OPTIONAL) Enter the keyword `always` to specify that default route information must always be advertised.
metric metric-value	(OPTIONAL) Enter the keyword `metric` then a number to configure a metric value for the route. The range is from 1 to 16777214.
metric-type type-value	(OPTIONAL) Enter the keywords `metric-type` then an OSPF link state type of 1 or 2 for default routes. The values are: 1 = Type 1 external route 2 = Type 2 external route
route-map map-name	(OPTIONAL) Enter the keywords `route-map` then the name of an established route map.

Defaults

Disabled.

Command Modes

ROUTER OSPF

Supported Modes

Full—Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

redistribute — redistributes routes from other routing protocols into OSPF.