跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show vlan

Display the current VLAN configurations on the switch.

Syntax

show vlan [brief | id vlan-id | name vlan-name]

Parameters

brief	(OPTIONAL) Enter the keyword `brief` to display the following information: VLAN ID VLAN name (left blank if none is configured) Spanning Tree Group ID MAC address aging time IP address
id vlan-id	(OPTIONAL) Enter the keyword `id` then a number from 1 to 4094. Only information on the VLAN specified is displayed.
name vlan-name	(OPTIONAL) Enter the keyword `name` then the name configured for the VLAN. Only information on the VLAN named is displayed.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show vlan command shown in the following example.

Column Heading	Description
(Column 1 — no heading)	asterisk symbol (*) = Default VLAN G = GVRP VLAN P = primary VLAN C = community VLAN I = isolated VLAN O = OpenFlow
NUM	Displays existing VLAN IDs.
Status	Displays the word Inactive for inactive VLANs and the word Active for active VLANs.
Q	Displays G for GVRP tagged M for member of a VLAN-Stack VLAN T for tagged interface U for untagged interface x (not capitalized x) for Dot1x untagged X (capitalized X) for Dot1x tagged o (not capitalized o) for OpenFlow untagged O (capitalized O) for OpenFlow tagged H for VSN tagged i (not capitalized i) for Internal untagged I (capitalized I) for Internal tagged v (not capitalized v) for VLT untagged V (capitalized V) for VLT tagged
Ports	Displays the type, slot, and port information. Po = port channel Gi = gigabit Ethernet Te = ten-gigabit Ethernet

Example

Dell#show vlan
                                             
                                             Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
                                             Primary, C - Community, I - Isolated
                                             Q: U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Vlan-stack, H - VSN tagged
                                             i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
                                             NUM  Status    Description Q Ports
                                             1    Inactive  a
                                             2    Inactive
                                             *  20   Active                 U Te 0/3,5,13,53-56
                                             1002 Active                 T Te 0/3,13,55-56
                                             Dell#

Example (VLAN ID)

Dell# show vlan id 40
                                             
                                             Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
                                             VLANs, P - Primary, C - Community, I - Isolated
                                             Q: U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Vlan-stack, H - VSN tagged
                                             i - Internal untagged, I - Internal tagged, v - VLT untagged, V
                                             - VLT tagged
                                             NUM  Status    Description Q Ports
                                             1    Inactive  a
                                             Dell#

Example (Brief)

Dell#show vlan brief
                                             VLAN Name STG MAC Aging IP Address
                                             ---- ------------------------------
                                             1         0   0         unassigned
                                             2         0   0         unassigned
                                             20        0   0         unassigned
                                             1002      0   0         unassigned
                                             Dell#

Example (Name)

Dellconf)#interface vlan 222
                                             Dell(conf-if-vl-222)#name test
                                             Dell(conf-if-vl-222)#do show vlan name test
                                             
                                             Codes: * - Default VLAN, G - GVRP VLANs
                                             Q: U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Vlan-stack
                                             
                                             NUM  Status Description  Q Ports
                                             222  Inactive            U Gi 1/22
                                             Dell(conf-if-vl-222)#

Related Commands

vlan-stack compatible — enables the Stackable VLAN feature on the selected VLAN.

interface vlan — configures a VLAN.