跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show interfaces switchport

Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE 802.1Q tag status and VLAN membership.

Syntax

show interfaces switchport [ interface | stack-unit unit-id ]

Parameters

interface

(OPTIONAL) Enter one of the following keywords and slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information.
Enter the keyword backup to view the backup interface for this interface.

NOTE: This command also enables you to view information corresponding to a range of ports.
- For physical interfaces, you can specify multiple ports as slot/port-range. For example, if you want to display information corresponding to all ports between 1 and 4, specify the port range as show interfaces interface-type 1/1 - 4.
- For port–channel interfaces, you can specify multiple ports as port-range. For example, if you want to display information corresponding to all ports between 1 and 4, specify the port range as show interfaces port—channel 1 - 4.

stack-unit unit-id

(OPTIONAL) Enter the keywords stack-unit followed by the stack member number. The range is from 0 to 5.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM and added support to display the interface configurations corresponding to a range of ports.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

The following describes the show interfaces switchport command for the following example.

Items	Description
Name	Displays the interface’s type, slot, and port number.
802.1QTagged	Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”), which supports both untagged and tagged VLANs by port 13/0.
Vlan membership	Lists the VLANs to which the interface is a member. Starting with Dell Networking OS version 7.6.1, this field can display native VLAN membership by port 13/0.

Example

Dell#sh interfaces switchport
                                             
                                             Codes:  U - Untagged, T - Tagged
                                             x - Dot1x untagged, X - Dot1x tagged
                                             G - GVRP tagged, M - Trunk, H - VSN tagged
                                             i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
                                             
                                             Name: TenGigabitEthernet 2/9
                                             802.1QTagged: True
                                             Vlan membership:
                                             Q       Vlans
                                             T       1001
                                             
                                             
                                             Name: TenGigabitEthernet 2/11
                                             802.1QTagged: True
                                             Vlan membership:
                                             Q       Vlans
                                             T       1001
                                             
                                             
                                             Dell#

Related Commands

show ip interface — displays Layer 3 information about the interfaces.