跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show sflow stack-unit

Display the sFlow information on a stack unit.

Syntax

show sflow stack-unit { unit number}

Parameters

unit number

(OPTIONAL) Enter a unit number to view information on the stack unit in that slot. The range is from 0 to 5.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in the following example below always displays a value of zero.

Example

Dell#show sflow stack-unit 1
                                             Stack-Unit 1
                                             Samples rcvd from h/w      :0
                                             Total UDP packets exported :0
                                             UDP packets dropped          :0
                                             Dell#