跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show cam-acl-egress

Show information on FP groups allocated for egress ACLs.

Syntax

show cam-acl-egress

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show cam-acl-egress 
                                             
                                             -- Chassis Egress Cam ACL --
                                             Current Settings(in block sizes) 
                                             1 block = 256 entries 
                                             L2Acl        :         1
                                             Ipv4Acl      :         1
                                             Ipv6Acl      :         2
                                             
                                             -- stack-unit 0 --
                                             Current Settings(in block sizes)
                                             L2Acl        :         1
                                             Ipv4Acl      :         1
                                             Ipv6Acl      :         2

Related Commands

cam-acl — configures CAM profiles to support IPv6 ACLs.