跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show running config acl-vlan-group

Display the running configuration of all or a given ACL VLAN group.

Syntax

show running config acl-vlan-group group name

Parameters

group-name

Display only the ACL VLAN group that is specified. The maximum group name is 140 characters.

Default

None

Command Modes

EXEC

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.3(0.0)	Introduced on the MXL 10/40GbE Switch IO Module platform.

Examples

The following sample output shows the line-by-line style display when using the show running-config acl-vlan-group option. Note that no group or access list names are truncated

Dell#show running-config acl-vlan-group 
                                             !
                                             acl-vlan-group Test
                                             member vlan 1-100
                                             ip access-group test in
                                             
                                             Dell#show running-config acl-vlan-group  Test
                                             !
                                             acl-vlan-group Test
                                             member vlan 1-100
                                             ip access-group test in