跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip dhcp snooping binding

Create a static entry in the DHCP binding table.

Syntax

[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address interface type slot/port lease number

Parameters

mac address	Enter the keyword `mac` then the MAC address of the host to which the server is leasing the IP address.
vlan-id vlan-id	Enter the keywords `vlan-id` then the VLAN to which the host belongs. The range is from 2 to 4094.
ip ip-address	Enter the keyword `ip` then the IP address that the server is leasing.
interface type	Enter the keyword `interface` then the type of interface to which the host is connected: For a Ten-Gigabit Ethernet interface, enter the keyword `tengigabitethernet`.
slot/port	Enter the slot and port number of the interface.
lease time	Enter the keyword `lease` then the amount of time the IP address are leased. The range is from 1 to 4294967295.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

show ip dhcp snooping — displays the contents of the DHCP binding table.