跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

neighbor peer-group (creating group)

Allows you to create a peer group and assign it a name.

Syntax

neighbor peer-group-name peer-group

To delete a peer group, use the no neighbor peer-group-name peer-group command.

Parameters

peer-group-name

Enter a text string up to 16 characters long as the name of the peer group.

Defaults

Not configured.

Command Modes

ROUTER BGP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

When a peer group is created, it is disabled ( shut mode).

Related Commands

neighbor peer-group (assigning peers) — assigns routers to a peer group.

neighbor remote-as — assigns a indirectly connected AS to a neighbor or peer group.

neighbor shutdown — disables a peer or peer group.