跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip pim summary

View information about PIM-SM operation.

Syntax

show ip pim summary

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full—Swtich

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show ip pim summary
                                             
                                             PIM TIB version 495
                                             Uptime 22:44:52
                                             Entries in PIM-TIB/MFC : 2/2
                                             
                                             Active Modes :
                                             PIM-SNOOPING
                                             
                                             Interface summary:
                                             1 active PIM interface
                                             0 passive PIM interfaces
                                             3 active PIM neighbors
                                             
                                             TIB summary:
                                             1/1 (*,G) entries in PIM-TIB/MFC
                                             1/1 (S,G) entries in PIM-TIB/MFC
                                             0/0 (S,G,Rpt) entries in PIM-TIB/MFC
                                             
                                             0 PIM nexthops
                                             0 RPs
                                             0 sources
                                             0 Register states
                                             
                                             Message summary:
                                             2582/2583 Joins sent/received
                                             5/0 Prunes sent/received
                                             0/0 Candidate-RP advertisements sent/received
                                             0/0 BSR messages sent/received
                                             0/0 State-Refresh messages sent/received
                                             0/0 MSDP updates sent/received
                                             0/0 Null Register messages sent/received
                                             0/0 Register-stop messages sent/received
                                             
                                             Data path event summary:
                                             0 no-cache messages received
                                             0 last-hop switchover messages received
                                             0/0 pim-assert messages sent/received
                                             0/0 register messages sent/received
                                             
                                             Memory usage:
                                             TIB             : 3768 bytes
                                             Nexthop cache   : 0 bytes
                                             Interface table : 992 bytes
                                             Neighbor table  : 528 bytes
                                             RP Mapping      : 0 bytes