跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show vlt mismatch

Display mismatches in VLT parameters.

Syntax

show vlt mismatch

Command Modes

EXEC

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Supported on the M I/O Aggregator.

Example

Dell#show vlt mismatch
                                             Domain
                                             -----------
                                             Parameters        Local              Peer
                                             ------------     -----------       ---------
                                             Unit-ID       0                   15
                                             
                                             Vlan-config
                                             ------------
                                             Vlan-ID      Local Mode     Peer Mode
                                             ---------   ------------ -----------
                                             
                                                  100              --                  L3
                                             
                                             Vlan IPV4 Multicast Status
                                             --------------------------
                                               Vlan-ID       Local Status       Peer Status
                                               --------      ------------       -----------
                                             
                                               4094               Active              Inactive
                                             
                                             Dell#