跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

banner login

Set a banner to display when logging on to the system.

Syntax

banner login {keyboard-interactive | no keyboard-interactive} [ c line c]

Parameters

keyboard-interactive	Enter the keyword `keyboard-interactive` to require a carriage return (CR) to get the message banner prompt.
c	Enter a delineator character to specify the limits of the text banner. The delineator is a percent character (%).
line	Enter a text string for your text banner message ending the message with your delineator. The delineator is a percent character (%). Range: maximum of 50 lines, up to 255 characters per line

Defaults

No banner is configured and the CR is required when creating a banner.

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.3(0.0)	Supported on the M I/O Aggregator.

Usage Information

After entering the banner login command, type one or more spaces and a delineator character. Enter the banner text then the second delineator character. When the user is connected to the router, if a message of the day banner is configured, it displays first. If no message of the day banner is configured, the login banner and prompt appear. After the user has logged in, the EXEC banner (if configured) displays.

Example

Dell(conf)#banner login ?
                                             keyboard-interactive Press enter key to get prompt
                                             LINE c banner-text c, where 'c' is a delimiting character
                                             Dell(conf)#no banner login ?
                                             keyboard-interactive Prompt will be displayed by default
                                             <cr>
                                             Dell(conf)#banner login keyboard-interactive
                                             
                                             Enter TEXT message. End with the character '%'.
                                             This is the banner%
                                             Dell(conf)#end
                                             Dell#exit
                                             
                                             13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user on line console
                                             
                                             This is the banner
                                             
                                             Dell con0 now available
                                             
                                             Press RETURN to get started.
                                             13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on line console
                                             This is the banner
                                             Dell>

Related Commands

exec-banner— enables the display of a text string when you enter EXEC mode.