跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

ip igmp querier-timeout

Change the interval that must pass before a multicast router decides that there is no longer another multicast router that should be the querier.

Syntax

ip igmp querier-timeout seconds

To return to the default value, use the no ip igmp querier-timeout command.

Parameters

seconds

Enter the number of seconds the router must wait to become the new querier. The range is from 60 to 300. The default is 125 seconds.

Defaults

125 seconds

Command Modes

INTERFACE

Supported Modes

Programmable-Mux (PMUX)

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
9.2(0.0)	Introduced on the M I/O Aggregator.