跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

interface

Configure the primary, secondary, and control-vlan interfaces.

Syntax interface {primary interface secondary interface control-vlan vlan-id}

To return to the default, use the no interface {primary interface secondary interface control-vlan vlan-id} command.

Parameters
primary interface Enter the keyword primary to configure the primary interface then one of the following interfaces and slot/port information:
  • Fast Ethernet interface: enter the keyword FastEthernet then the slot/port information.
  • Port Channel interface: enter the keyword port-channel then a number. The range is from 1 to 128.
  • 10-Gigabit Ethernet interface: enter the keyword TenGigabitEthernet then the slot/port information
secondary interface Enter the keyword secondary to configure the secondary interface then one of the following interfaces and slot/port information:
  • Fast Ethernet interface: enter the keyword FastEthernet then the slot/port information.
  • Port Channel interface: enter the keyword port-channel then a number. The range is from 1 to 128.
  • 10-Gigabit Ethernet interface: enter the keyword TenGigabitEthernet then the slot/port information
control-vlan vlan-id Enter the keyword control-vlan then the VLAN ID. The range is from 1 to 4094.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information This command causes the Ring Manager to take ownership of the two ports after IFM validates the configuration. Ownership is relinquished for a port only when the interface does not play a part in any control VLAN, that is, the interface does not belong to any ring.
Related Commands show frrp — displays the resilient ring protocol configuration information.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\