跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

Force10 Resilient Ring Protocol (FRRP)

FRRP is a proprietary protocol for that offers fast convergence in a Layer 2 network without having to run the spanning tree protocol (STP). The resilient ring protocol is an efficient protocol that transmits a high-speed token across a ring to verify the link status. All the intelligence is contained in the master node with practically no intelligence required of the transit mode.

Important Points to Remember

  • FRRP is media- and speed-independent.
  • FRRP is a Dell Networking proprietary protocol that does not interoperate with any other vendor.
  • Spanning Tree must be disabled on both primary and secondary interfaces before Resilient Ring protocol is enabled.
  • A virtual local area network (VLAN) configured as the control VLAN for a ring cannot be configured as a control or member VLAN for any other ring.
  • Member VLANs across multiple rings are not supported in Master nodes.
  • If multiple rings share one or more member VLANs, they cannot share any links between them.
  • Each ring can have only one Master node; all others are Transit nodes.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\