跳转至主要内容
退出

欢迎访问戴尔

我的帐户
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”（公司管理），管理Dell EMC站点、产品和产品级联系人。
登录 创建帐户 登录Premier 合作伙伴计划登录
联系我们

您的 Dell.com 购物车

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp summary

Allows you to view the status of all BGP connections.

Syntax show ip bgp [ ipv4 unicast] summary
Command Modes
  • EXEC
  • EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information

The following describes the show ip bgp summary command shown in the following example.

Field Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries, route paths, and the amount of memory used to process those entries.
paths Displays the number of paths and the amount of memory used.
denied paths Displays the number of denied paths and the amount of memory used.
BGP path attribute entries Displays the number of BGP path attributes and the amount of memory used to process them.
BGP AS-PATH entries Displays the number of BGP AS_PATH attributes processed and the amount of memory used to process them.
BGP community entries Displays the number of BGP COMMUNITY attributes processed and the amount of memory used to process them. The show ip bgp community command provides more details on the COMMUNITY attributes.
Dampening enabled Displayed only when you enable dampening. Displays the number of paths designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
OutQ Displays the number of messages waiting to be sent to that neighbor. If a number appears in parentheses, the number represents the number of messages waiting to be sent to the peer group.
Up/Down

Displays the amount of time that the neighbor is in the Established stage. If the neighbor has never moved into the Established stage, the word never is displayed.

The output format is:

Time Established Display Example
< 1 day 00:12:23 (hours:minutes:seconds)
< 1 week 1d21h (DaysHours)
> 1 week 11w2d (WeeksDays)
State/Pfxrcd

If the neighbor is in Established stage, the number of network prefixes received.

If a maximum limit was configured with the neighbor maximum-prefix command, (prfxd) appears in this column.

If the neighbor is not in Established stage, the current stage is displayed (Idle, Connect, Active, OpenSent, OpenConfirm). When the peer is transitioning between states and clearing the routes received, the phrase (Purging) may appear in this column.

If the neighbor is disabled, the phrase (Admin shut) appears in this column.

Example (S4810) 
Dell#show ip bgp summary
                                             BGP router identifier 120.10.10.1, local AS number 100
                                             BGP table version is 34, main routing table version 34
                                             9 network entrie(s) using 1372 bytes of memory
                                             5 paths using 380 bytes of memory
                                             4 denied paths using 164 bytes of memory
                                             BGP-RIB over all using 385 bytes of memory
                                             2 BGP path attribute entrie(s) using 168 bytes of memory
                                             1 BGP AS-PATH entrie(s) using 39 bytes of memory
                                             1 BGP community entrie(s) using 43 bytes of memory
                                             2 neighbor(s) using 7232 bytes of memory
                                             
                                             Neighbor   AS  MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/Pfx
                                             100.10.10.2 200     46     41     34   0    0 00:14:33    5
                                             120.10.10.2 300     40     47     34   0    0 00:37:10    0
                                             Dell#

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗？
0/3000 characters
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请提供评级（1-5星）。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符：<>()\