跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

logging console

Specify which messages are logged to the console.

Syntax

logging console [ level]

To return to the default values, use the default logging console command.

To disable logging to the console, use the no logging console command.

Parameters

level

(OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging.

Defaults

level = 7; size = debugging

Command Modes

CONFIGURATION

Supported Modes

Full–Switch Mode

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

clear logging — clears the logging buffer.

default logging console — returns the logging console parameters to the default setting.

show logging — displays the logging setting and system messages in the internal buffer.