跳转至主要内容

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show software ifm

Display interface management (IFM) data.

Syntax

show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID | trace-flags}

Parameters

clients	Enter the keyword `clients` to display IFM client information.
summary	(OPTIONAL) Enter the keyword `summary` to display brief information about IFM clients.
ifagt number	Enter the keyword `ifagt` then the number of an interface agent to display software pipe and IPC statistics.
ifcb interface	Enter the keyword `ifcb` then one of the following interface IDs then the slot/port information to display interface control block information for that interface: For a Port Channel interface, enter the keywords `port-channel` then a number. The range is from 1 to 128. For a 10G Ethernet interface, enter the keyword `TenGigabitEthernet`.
stack-unit unit-ID	Enter the keywords `stack-unit` then the stack member number to display IFM information for that unit. The range is from 0 to 5.
trace-flags	Enter the keyword `trace-flags` to display IFM information for internal trace flags.

Defaults

none

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

DELL#show software ifm clients summary
                                             ClntType Inst svcMask   subSvcMask tlvSvcMask tlvSubSvc swp
                                             IPM      0   0x00000000 0x00000000 0x90ff71f3 0xb98784a1 22
                                             RTM      0   0x00000000 0x00000000 0x800010ff 0x0064c798 56
                                             RIP      0   0x00000dfe 0x00000000 0x00000000 0x00000000 0
                                             ISIS     0   0x00000002 0x00000000 0x00000000 0x00000000 0
                                             VRRP     0   0x00000000 0x00000000 0x803330f3 0x0013c480 38
                                             L2PM     0   0x00000000 0x00000000 0x87ff79ff 0xdb80c800 64
                                             ACL      0   0x00000000 0x00000000 0x867f50c3 0x0103c018 81
                                             OSPF     0   0x00000dfa 0x00100338 0x00000000 0x00000000 0
                                             PIM      0   0x000e00f3 0x0000c000 0x00000000 0x00000000 0
                                             IGMP     0   0x000e027f 0x00000000 0x00000000 0x00000000 0
                                             SNMP     0   0x00000000 0x00000000 0x8000c2c0 0x00000002 21
                                             EVTTERM  0   0x00000000 0x00000000 0x800002c0 0x0003c000 20
                                             MRTM     0   0x00000000 0x00000000 0x81f7103f 0xc0600000 30
                                             DSM      0   0x00000000 0x00000000 0x80771033 0x00000000 58
                                             Mirror   0   0x00000000 0x00000000 0x80770003 0x00000000 25
                                             LACP     0   0x00000000 0x00000000 0x8000383f 0x01000000 33
                                             SFL_CP   0   0x00000000 0x00000000 0x807739ff 0x00000000 24
                                             DHCP     0   0x00000000 0x00000000 0x807040f3 0x18001000 35
                                             V6RAD    0   0x00000433 0x0000c000 0x00000000 0x00000000 0
                                             Unidentified Client0   0x006e0002 0x00000000 0x00000000 0x00000000 0
                                             Unidentified Client0   0x6066003f 0x00000000 0x6066003f 0x00000000 95
                                             LLDP     0 0x007f2433 0x0408c000 0x007f2433 0x0408c000 60
                                             --More--