Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

Syntax	show ip access-lists [ access-list-name] [interface interface] [in]
Parameters	access-list-name Enter the name of a configured MAC ACL, up to 140 characters. interface interface Enter the keyword interface then the one of the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords port-channel then a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. in Identify whether ACL is applied on the ingress or egress side.
Command Modes	EXEC Privilege
Supported Modes	Full–Switch
Command History	Version Description 9.9(0.0) Introduced on the FN IOM. 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show ip access-lists  test  in 
                                 Standard Ingress IP access list test
                                 seq 5 permit 1.1.1.0/24 count (0 packets)
                                 seq 10 deny 2.1.1.0/24 count (0 packets)