Integrated Dell Remote Access Controller 9 Version 3.30.30.30 User's Guide

Configuring email alert settings using RACADM

1. To enable email alert:

   racadm set iDRAC.EmailAlert.Enable.[index] [n]

   Parameter	Description
   index	Email destination index. Allowed values are 1 through 4.
   n=0 n=1	Disables email alerts. Enables email alerts.

2. To configure email settings:

   racadm set iDRAC.EmailAlert.Address.[index] [email-address]

   Parameter	Description
   index	Email destination index. Allowed values are 1 through 4.
   email-address	Destination email address that receives the platform event alerts.

3. To configure a custom message:

   racadm set iDRAC.EmailAlert.CustomMsg.[index] [custom-message]

   Parameter	Description
   index	Email destination index. Allowed values are 1 through 4.
   custom-message	Custom message

4. To test the configured email alert, if required:

   racadm testemail -i [index]

   Parameter	Description
   index	Email destination index to be tested. Allowed values are 1 through 4.

   For more information, see the iDRAC RACADM CLI Guide available at www.dell.com/idracmanuals.